Network Settings; Network Preferences; Voip Over 3G - Aastra Amc 3 User Manual

Android

Hide thumbs Also See for Amc 3:

Table of Contents

11.4 Network Settings

The following settings manage the use of Packet Data for all services offered by the

AMC.

Unlike Wi-Fi connections, cellular connections cannot carry data. Availability of data

channels depends on your provider and on your contract. Many contracts come with a

certain amount of data trafﬁc included Packet Data.

The Packet Data settings described here allow you to determine if and how the AMC

is allowed to use cellular Packet Data. You can choose to generally disable it for the

AMC (Off ), use it exclusively for HTTP(S) requests (Minimal, i.e. Corporate Contacts

access, HTTPS Callbacks etc.), or allow its usage only in your provider's network (Local

Network ). To use it whenever needed for a system registration (no Voice over 3G) set

this to GPRS Dynamic.

Local Network + Roaming = Minimal

Please note that while in roaming in other provider networks and while the

setting Local Network is active, the actual usage of the cellular data channel

is done according to the setting Minimal, i.e. registrations are not possible

and only HTTP(S) requests are allowed.

Native Settings Dependent

Smartphones have preference options to enable or disable the use of packet

data. If turned off in the native menu, any preferences made within the AMC

remain without effect!

Costs and Battery Life

Please note that the usage of data channels may drain the phone's battery.

If costs run too high, a provider might also disconnect the call. Section

page

contains information about the amount of data consumed by certain

features.

Check the box behind the setting VoIP over 3G to enable VoIP calls over Packet Data.

Please note that the information given above - about battery life etc. - also apply to this

setting.

amc-3_android_ug_en_2012-10

11 User Settings

Table of Contents