Table of Contents
Advertisement
11 User Settings
11.5.3 Automatic Start
If Automatic Start is enabled, the AMC will be started automatically whenever the phone
is switched on.
11.5.4 Handover Settings
The following settings determine when a handover from a VoIP call to a cellular call
(and vice versa) is triggered.
Automatic Handovers can be enabled and disabled with the checkbox in this section.
11.5.5 Operator Supported Dialing (OSD)
Some operators can call your configured PBX Dialing-in number automatically. Please
note that this will only work with the SIM card for which your AMC was activated. If your
provider supports OSD and if you would like to use it, set this setting to On.
This will only be applied when you are not in a roaming state.
11.5.6 Call Reverse Enabled
If this option is enabled inbound calls will be rejected and an automatic call back to
the party in concern is initiated. Refer to
12.1.5
for a description of Call Reverse. The
option Maintain 3G Connection is automatically enabled if Call Reverse is enabled.
11.5.7 Audio Separation
Due to platform properties, it is not possible to separate a Wi-Fi audio connection on
some devices (for example on Milestone and Droid) as it is possible on other hardware.
Solve this issue by activating Audio Separation.
11.5.8 Energy Saving
If Energy Saving is activated, the processor performance will be lowered as soon as the
phone is in stand-by. This can perceivably prolong the battery life of your smartphone.
This setting is disabled by default.
38
amc-3_android_ug_en_2012-10
Advertisement
Table of Contents
