Usb Copy - Thecus N2800 User Manual

Icon Function
▲
Up Button
▼ Down Button
Enter

ESC Escape
There are two modes of operation for the OLED: Display Mode and Management
Mode.
Display Mode
During normal operation, the OLED will be in Display Mode.
Display Mode
Item
Host Name
WAN/LAN1
LAN2
Link Aggregation
System Fan
CPU Fan
2009/05/22 12:00
RAID
The Thecus IP storage will rotate these messages every one-two seconds on the
OLED display.

USB Copy

The USB Copy function enables you to copy files stored on USB devices such as USB
disks and digital cameras to the Thecus IP storage by press USB copy button. To use
USB copy, follow the steps below:
N2800:
1. Plug your USB device into an available USB port on the Rear Panel.
2. Press the "USB Copy Button".
3. The N2800 will start copying USB disks connected to the rear USB port. The
LCD will display the USB copy progress and result.
N4800:
1. Plug your USB device into an available USB port on the Front end.
2. In Display Mode, press the Down Button (▼).
3. The OLED will display "USB Copy?"
4. Press Enter (
front USB port.
5. All of data will be copied into system folder named "USB copy".
Description
Select the previous configuration settings option.
USB copy confirmation display.
Enter the selected menu option, sub-menu, or parameter setting.
Escape and return to the previous menu.
Description
Current host name of the system.
Current WAN/LAN1 IP setting.
Current LAN2 IP setting.
Current Link Aggregation status
Current system fan status.
Current CPU fan status
Current system time.
Current RAID status.

) and the N4800 will start copying USB disks connected to the
18