Thecus N2800 User Manual page 51

6. Quick RAID — Enabled the quick RAID setting is going to enhance RAID
creation time.
NOTE
7. Specify a stripe size — 64K is the default setting.
8. Selected the file system you like to have for this RAID volume. The selection
is available from ext3, XFS and ext4.
NOTE
9. Press Submit to build the RAID storage volume.
We recommend is "Quick RAID" setting is going to be used, only if hard disk
is brand new or it has no existed partitions contained.
Single volume size supported:
ext3  8TB
XFS  48TB
ext4  36TB
51