Notification Configuration; Firmware Upgrade - Thecus N2800 User Manual

Notification configuration

From the menu, choose the Notification item, and the Notification
Configuration screen appears. This screen lets you have Thecus IP storage notify
you in case of any system malfunction. Press Apply to confirm all settings. See
following table for a detailed description of each item.
Notification Configuration
Item
Beep Notification
Email Notification
Authentication Type
SMTP Server
Port
SMTP Account ID
Account Password
Log Level
Sender's E-mail
Address
Receiver's E-mail
Address (1,2,3,4)
NOTE

Firmware Upgrade

From the menu, choose the Firmware Upgrade item and the Firmware Upgrade
screen appears.
Follow the steps below to upgrade your firmware:
Description
Enable or disable the system beeper that beeps when a problem
occurs.
Enable or disable email notifications of system problems.
Select the SMTP Server account authentication type.
Specifies the hostname/IP address of the SMTP server.
Specifies the port to send outgoing notification emails.
Set the SMTP Server Email account ID.
Enter a new password.
Select the log level to send the e-mail out.
Set email address to send email.
Add one or more recipient's email addresses to receive email
notifications.
Consult with your mail server administrator for email server
information.
32