Sysmode - HP Integrity rx4640 User's & Service Manual

Syntax
pdt (clear)
Parameters
<clear> clears the pdt
Operation
With no options specified, the command displays the PDT information for the server. The PDT is cleared and
a reboot is required for memory reallocation and safe booting.
Example C-16 pdt Command
Shell> pdt
PDT Information for PD
Last Clear time for PD: PDT has not been cleared
Number of total entries in PD PDT:
Number of used entries in PD PDT:
Number of free entries in PD PDT:
Number of permanent correctable (SBE) entries in PD PDT:
Number of permanent uncorrectable (MBE) entries in PD PDT:
Address of first uncorrectable error in PD:
Example C-17 pdt clear Command
Shell> pdt clear
Are you sure you want to clear the PDT? [y/N] y
Shell>
Shell> pdt
PDT Information
Last Clear time: 10/21/01
Number of total entries in PDT:
Number of used entries in PDT:
Number of free entries in PDT:
Number of single-bit entries in PDT:
Number of multi-bit entries in PDT:
Address of first multi-bit error: 0x0000000000000000

sysmode

Display or modify the system mode.
Syntax
sysmode <normal | admin| service>
Parameters
<normal> sets system mode to normal
<admin> sets system mode to admin
<service> sets system mode to service
Appendix C
100
0
50
0
0
0x0000000000000000
5:00p
50
0
50
0
0
Utilities
EFI/POSSE Commands
179