Configuring Wpa-Psk Encryption - THOMSON TG784 Setup And User Manual

3 Wireless Access
3.3.1

Configuring WPA-PSK Encryption

Procedure
Continuing from
1 Select Use WPA-PSK Encryption.
2 In the WPA-PSK Encryption Key box, type a the key of your choice. The key must be in one of the
following formats:
8 to 63 alphanumeric characters. For example: MyKey123
8 to 64 hexadecimal characters (characters from 0 to 9 and from A to F). For example: C54F48A5.
3 In the WPA-PSK Version list, click the WPA-version of your choice. Following options are available:
WPA2:
WPA2 is the most secure version, but not all wireless clients already support it. Before you select this
version, make sure all of your wireless clients support it.
WPA+WPA2:
If not all of your wireless clients support WPA2 or you are not sure if they support WPA2, we
recommend you to choose WPA+WPA2. Wireless clients that support WPA2 will use WPA2, the
others will use WPA.
WPA:
If none of your wireless clients support WPA2 choose this option.
If you want to configure WPA2 on the built-in wireless utility of Windows XP Service Pack 2
(SP2), you first have to:
- or -
4 Click Apply.
5 Configure your wireless client(s) with the same settings.
30
"Configuring the wireless encryption" on page
Upgrade your Windows XP to Service Pack 3.
Install the following update: http://support.microsoft.com/kb/917021.
29:
E-DOC-CTC-20090619-0010 v1.0