Table of Contents
Advertisement
WLAN Configuration
When a compatible wireless USB dongle is
installed on the N3200PRO, the N3200PRO
will become an access point, and the
Network dropdown menu will contain a
WLAN menu item. From the Network menu,
choose WLAN, and the WLAN
Configuration screen appears. This screen
displays the wireless network parameters of
the system. You can to change any of these
items and press Apply to confirm your
settings.
NOTE
WLAN Configuration
Item
MAC Address
IP
Netmask
ESSID
ESSID Broadcast
Channel
Auth Mode
WEP Enable
Key Length
WEP KEY 1
WEP KEY 2
WEP KEY 3
WEP KEY 4
A DHCP server can be configured to assign IP addresses to devices connected to
LAN ports.
WLAN DHCP Configuration
Item
DHCP Server
Start IP
End IP
DNS Server
• Currently supported USB wireless
dongles are: 3Com 3CRUSB10075,
Zyxel G220USB, PCI GW-US54mini.
• USB dongles have to be connected
before the N3200PRO is powered up.
Description
Displays the MAC Address of the USB wireless dongle.
Specifies the IP address of the network connection.
Specifies the network mask, which is generally: 255.255.255.0
The ESSID (Extended Service Set Identification) is the
identifying name of a wireless network.
Specifies whether the ESSID will be broadcasted by the
N3200PRO. This will prevent the Access Point from broadcasting
the ESSID. The N3200PRO will still respond to a wireless device
that wants to communicate if it sends a matching ESSID.
The channel that the N3200PRO uses to communicate with client
devices.
Authentication mode used by the N3200PRO.
Shared: Shared key authentication
Open: Open key authentication
Specifies whether to use encryption for transmission or not.
Key length specifies the level of encryption used by the
N3200PRO.
64 bit: 10 characters from 0 ~ 9 and A ~ F.
128 bit: 26 characters from 0 ~ 9 and A ~ F.
Input up to 4 WEP keys, and select the one you wish to use.
When connecting, be sure to enter the same key and select the
same index number on each client machine.
Description
Select to enable or disable DHCP server.
Specifies the starting IP address of the DHCP range.
Specifies the ending IP address of the DHCP range.
Specifies the DNS server IP address.
33
Advertisement
Table of Contents
