Table of Contents
Advertisement
NOTE
- Setup a DynDNS Account
1. Go to http://www.dyndns.org f
2. Click on the Sign Up Now link.
3. Check the Check boxes, select a user name (i.e.: N3200PRO),
email address (i.e.: xxx@example.com), check Enable Wildcard, and
create a password (i.e.: xxxx).
4. Wait for an email from www.dyndns.org.
5. Open the email and click on the link to activate your account
Part II - Enable DDNS on the Router
1. Go to the router setup screen and select IP Config > Miscellan
DDNS Setting from your Home PC.
2. Click on Yes for Enable the DDNS Cl
3. Select www.dyndns.org.
4. Go to router setup screen, and enter the fol
a. User Name or E-mail Address: xx
b. Password or DDNS Key: xxxx
c. Host Name: www.N3200PRO.dyndns
d. Enable wildcard? Select Yes
e. Update Manually: Click Update
Part III - Setting up Virtual Ser
1. Navigate to NAT Setting > Virtual Ser
2. For Enable Virtual Server?, select Yes
3.
Setup the HTTPS Server
a. Well-Known Applicat
b. Local IP: E
c. Port Range:
N3200PRO)
d. Protocol: select TCP
e. Click Add.
f.
Click Apply.
4. Test the HTTPS connection from another computer on the Internet
a. From a remote computer, open your browser and enter
https://www.N3200PRO.dyn
b. You should see the login page of N3200PRO.
Firewall Software Configuration
If you are using a software f
trouble connecting to the N3200PRO, you can try the following steps:
1. Double click the NIS icon on system tray, and then configure the
Personal Firewall.
2. On the Programs page, find the SetupWizard.exe and change its
permission to "Permit All". If it's not in
Program Scan
Router setup will differ slightly
depending on router used. For this example, we will
use the Asus WL500g because i
hardware vendor for setup help.
vers (HTTPS)
ions: Select User Defined
nter 192.168.1.100
443 (the default HTTPS port setting on the
irewall (i.e. Norton Internet Security) and are having
buttons to find it.
t has support for Dynamic DNS. Contact your router
rom your home PC.
ient?
lowing information:
x@example.com
.org
ver.
dns.org
the program list, use the Add or
85
Part I
enter your
eous
Advertisement
Table of Contents
