Table of Contents
Advertisement
Click Config.
2. Select your desired RAID level, and check the checkboxes of the disks you
wish to use in your array.
3. Select a stripe size – the default is 64K.
4. Click Create to create your selected RAID volume.
LCD Operation
The N3200PRO is equipped with an LCD on the front for easy status display and
setup. There are four buttons on the front panel to control the LCD functions.
LCD Controls
Use the Down (
), Up (
▼
view system information and USB copy.
The following table illustrates the keys on the front control panel:
LCD Controls
Icon
Function
Down Button
▼
Up Button
▲
↵
Enter
ESC
Escape
Display Mode
During normal operation, the LCD will be in Display Mode.
Display Mode
Item
Host Name
WAN
LAN
RAID
System Fan
Temperature
Date/Time
Up Time
↵
), Enter (
) and Escape (ESC) keys to operate LCD to
▲
Description
Select the previous configuration settings option.
Select the next configuration settings option.
Enter to display USB copy operation.
Escape to give up USB copy.
Press and hold for 3 seconds to turn off the LCD's backlight.
Press any button to switch the backlight back on.
Description
Current host name of the system.
Current WAN IP setting.
Current LAN IP setting.
Current RAID status.
Current system fan status.
Current system temperature.
Current system date and time
The system power on time since last start
17
Advertisement
Table of Contents
