Postscript Envelope Tray Support - Lexmark MS310d Technical Reference

PostScript (PS) emulation
Literal names supported
= Supported
X = Not Supported
Literal names
Literal name Compatible literal name
b5envelope 176x250envelope
c5envelope 162x229envelope
com10envelope 4.125x9.5envelope
dlenvelope 110x220envelope
monarcenvelope 3.875x7.5envelope

PostScript envelope tray support

The envelope tray the printer selected when it receives an envelopetray operator is listed in
on page 14.
Printer action when manualfeed is false
The printer sets the PageSize Policy to 0 if manualfeed in statusdict and the ManualFeed page device parameter are false.
The printer checks and compares source tray size settings between printer and print job data stream.
Envelope setting
Envelope size settings match
Envelope size settings do not
match
Requested size and type are not
available from any automatic
source
Printer action when manualfeed is true
The printer prompts you to load the requested size manually if manualfeed or ManualFeed is true. If no manual feed exists
on the printer, then a rangecheck error message is issued.
These operators are equivalent to executing the following PS emulation sequence:
<</PageSize [x y] /ImagingBBox null /Policies<</PageSize 0>> >>
setpagedevice
where x and y are the PageSize in points.
MS310, MS312, MS315,
MS410, MS415, MS510,
Printer action
The printer pulls the envelope.
The printer searches sources in the order defined by the Priority array in the InputAttributes
dictionary in the pagedevice dictionary.
If search cannot find the requested media size, then the following search order is used:
•
Envelope feeder
•
Multipurpose feeder
You are prompted to load the requested envelope size and type in the manual feed source.
If the size is still not available, then a configurationerror is issued, and the print job is flushed.
Printer model
MX310, MX410, MX510,
MS610
X
MX610, MX611
MX511
X
"Envelopetray operator selections"
13
X