Postscript Envelope Tray Support - Lexmark MS310d Technical Reference

PostScript (PS) emulation
Literal names supported
= Supported
X = Not Supported
Literal names
Literal name Compatible literal name
b5envelope 176x250envelope
c5envelope 162x229envelope
com10envelope 4.125x9.5envelope
dlenvelope 110x220envelope
monarcenvelope 3.875x7.5envelope

PostScript envelope tray support

If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of the
envelopetray operators listed in "Envelopetray operator selections" on page 14, then the following occurs:
•
The printer sets the PageSize Policy to 0.
• The printer checks the active source to see if it matches the requested envelope size. If the sizes match, then the envelope
is fed from the active source.
Note: The active source is the last source selected from the printer control panel or data stream.
•
If the requested size and the size loaded in the active source do not match, then the sources are searched in the order
defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
•
If the requested media size is not found by the previous search, then the following search order is used:
– Envelope feeder
–
Multipurpose feeder
•
If the requested size and type are not available from any automatic source, then you are prompted to load the requested
envelope size and type in the manual feed source.
•
If the size is still not available, then a configurationerror is issued, and the print job is flushed.
If manualfeed or ManualFeed is true, then the printer prompts you to load the requested size manually. If no manual feed
exists on the printer, then a rangecheck error message is issued.
The envelope tray the printer selects when it receives an envelopetray operator is listed in "Envelopetray operator selections"
on page 14. These operators are equivalent to executing the following PostScript emulation sequence:
<</PageSize [x y] /ImagingBBox null /Policies<</PageSize 0>> >>
setpagedevice
where x and y are the PageSize in points.
= Supported
X = Not supported
Tray operators
Operator
110x220envelopetray
dlenvelopetray
162x229envelopetray
MS310, MS410, MS510,
Tray selected (corresponding image size is
set)
Tray with 110 x 220‑size envelopes
Tray with 110 x 220‑size envelopes
Tray with 162 x 229‑size envelopes
Printer model
MX310, MX410, MX510,
MS610
X
MS310, MS410,
MS510, MS610
MX610, MX611
MX511
X
Printer model
MX310, MX410,
MX510, MX511
14
X
MX610, MX611