Postscript Envelope Tray Support - Lexmark C734n Technical Reference

= Supported
X = Not Supported
Literal names
Literal name
c5envelope
b5envelope

PostScript envelope tray support

If manualfeed in statusdict and the ManualFeed page device parameter are false when the printer receives one of
the envelopetray operators listed in "Envelopetray operator selections" on page 17, then the printer:
•
Sets the PageSize Policy to 0.
•
Checks the active source to see if it matches the requested envelope size. If the sizes match, the envelope is fed
from the active source.
Note: The active source is the last source selected from the printer control panel or data stream.
•
If the requested size and the size loaded in the active source do not match, the sources are searched in the order
defined by the Priority array in the InputAttributes dictionary in the pagedevice dictionary.
•
If the requested media size is not found by the previous search, the following search order is used:
–
Envelope Feeder
–
Multipurpose Feeder
•
If the requested size and type are not available from any automatic source, you are prompted to load the requested
envelope size and type in the manual feed source.
•
If the size is still not available, a configurationerror is issued and the print job is flushed.
If manualfeed or ManualFeed is true, the printer prompts you to load the requested size manually. If no manual feed
exists on the printer, a rangecheck error message is generated
The envelope tray the printer selects when it receives an envelopetray operator is listed in "Envelopetray operator
selections" on page 17. These operators are equivalent to executing the following PostScript emulation sequence:
<</PageSize [x y] /ImagingBBox null /Policies<</PageSize 0>> >>
setpagedevice
where x y are the PageSize in points.
Compatible literal name
162x229envelope
176x250envelope
PostScript (PS) emulation
Printer models
C734n, C734dn/dtn/dw,
C736n, C736dn/dtn
16
X734de MFP, X736de
MFP, X738de MFP,
X738dte MFP