Gateway > Lan - Dhcp Server Config Page - Motorola SBG900 User Manual

Overview Installation Troubleshooting Contact
Gateway > LAN — dhcp server config Page
Only experienced network administrators should use this page to perform advanced DHCP server configuration:
CAUTION!
Do not modify these settings unless you are an experienced network administrator with strong
knowledge of IP addressing, subnetting, and DHCP.
Gateway > LAN — dhcp server config page fields
Field
LAN IP Address
LAN IP Subnet Mask
Starting IP Address
# of DHCP Users
DHCP Server Lease Time Sets the time in seconds that the
Domain Name
Time To Live
Interface Maximum
Transmission Unit
Apply
Home Print
Configuration: Basic Gateway TCP/IP Wireless USB
Description
Enter the IP address of the SBG900 for your private LAN. The default is 192.168.0.1.
The subnet mask in dotted-decimal format. The default is 255.255.255.0.
Enter the starting IP address to be assigned by the
dotted-decimal format. The default is 192.168.0.2.
Sets the number of clients for the
are 253 possible client addresses. The default is 253.
default is 3600 seconds (60 minutes).
Sets the domain name for the SBG900 LAN. The default is None.
Sets the TTL (hop limit) for outbound packets. The default is 64.
Sets the SBG900 LAN MTU in bytes. The minimum is 68 bytes. The default is 1500 bytes.
Click to apply your changes. You must reboot the
X
42
Exit
FAQ Specifications Glossary License
SBG900
SBG900
DHCP server to assign a private IP address. There
SBG900
DHCP server leases an IP address to a client. The
SBG900 .
SBG900 User Guide
DHCP server to clients in