Error! Style not defined. Error! Style not defined.
4.10
Touch Pad Board
Removing the touch pad board
Remove the touch pad board according to the following procedures.
1.
Detach the cable from the touch pad and peel off the mylar on the touch pad board.
2.
Remove one M2x3 screw and two M2x4 screws and remove the touch pad board from
the logic upper assembly.
Figure 4.33 Remove three screws and remove the touch pad board
NB300 Maintenance Manual
Figure 4.32 Detach the cable
M2x4*1
M2x3*1
M2x4*1
4 Replacement Procedures
4-35