Dell Inspiron 4150 User Manual page 163

Battery and Module Bay Latches: Dell Inspiron 4150
b. Ensure that the slider is inserted into the hole, that the side of the latch
with the two bumps is facing the back of the case, and that the side with
the wear rib is facing the front of the case.
HINT: The latch will not function properly if the slider is oriented incorrectly.
2. Snap in the new latch button from behind the bottom case, making certain that
the snap tabs are fully engaged in the latch.
To prevent the latch assembly from coming loose, apply pressure to the latch and
spring while installing the latch button.
3. Ensure that the newly installed latch moves smoothly and freely when pushed
and released.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/4150/baylatch.htm (3 of 3) [2/28/2004 7:29:50 AM]