Dell Inspiron 4150 User Manual page 138

Palm Rest: Dell Inspiron 4150
1 M2.5 x 12-mm screws
(3)
2 M2 x 3-mm screws (2)
3 hard drive door
5. Remove the two M2 x 3-mm screws that are located in the hard drive door
labeled "circle P."
6. Turn the computer over, and remove the three M2 x 3-mm screws that secure
the palm rest to the bottom case:
a. Remove the two M2 x 3-mm screws that are located on the back edge of
the bottom case, underneath the display.
b. Remove the M2 x 3-mm screw located underneath the keyboard, on the
right side of the bottom case, next to the microprocessor thermal cooling
assembly and opposite the S-video TV-out connector.
7. Pull up on the pull-tab that is attached to the palm-rest flex cable connector to
remove it from the interface connector on the system board.
file:///F|/Service%20Manuals/Dell/Inspiron/4150/palmrest.htm (2 of 4) [2/28/2004 7:29:45 AM]