Dell Inspiron 4150 User Manual page 150

Hybrid Cooling Fan: Dell Inspiron 4150
1 system-board interface
connector
2 fan power cable
3 spring fingers
4 keyboard screw hole
7. Disconnect the fan power cable from the system-board interface connector and
remove the hybrid cooling fan.
HINT: The fan power cable is long, and can be pulled out from under the EMI
shield to provide access to the connector.
NOTICE: Do not block the keyboard screw hole when reinstalling the fan. Route
the fan power cable under the spring fingers and behind the keyboard screw
hole to prevent damage to the fan power cable.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/4150/fan.htm (2 of 3) [2/28/2004 7:29:47 AM]
5 M2 x 3-mm screw
(1)
6 M2.5 x 5-mm screws
(2)
7 hybrid cooling fan