Dell Inspiron 4150 User Manual page 19

Solving Problems: Dell Inspiron 4150
If the message is not listed, see the documentation for the operating system or the
program that was running at the time the message appeared.
The file being copied is too large for the destination drive —
that you are trying to copy is too large to fit on the disk, or the disk is too
full. Try copying the file to a different disk or use a larger capacity disk.
A filename cannot contain any of the following characters: \ / : * ?
" < > | — Do not use these characters in filenames.
Insert bootable media —
nonbootable floppy disk or CD. Insert a bootable floppy disk or CD.
Non-system disk or disk error —
Remove the floppy disk and restart the computer.
Not enough memory or resources. Exit some programs and try again
— You have too many programs open. Close all windows and open the
program that you want to use.
Operating system not found —
for contact information.
A required .DLL file was not found —
open is missing an essential file. Remove and then reinstall the program.
1. Click the Start button and then click Control Panel.
2. Click Add or Remove Programs.
3. Select the program you want to remove.
4. Click Remove or Change/Remove and follow the prompts on the
screen.
5. See the program documentation for installation instructions.
x:\ is not accessible. The device is not ready —
drive and try again.
file:///F|/Service%20Manuals/Dell/Inspiron/4150/solving.htm (4 of 23) [2/28/2004 7:28:07 AM]
The operating system is trying to boot to a
A floppy disk is in the floppy drive.
Contact Dell. See your Owner's Manual
The program that you are trying to
The file
Insert a disk into the