Microprocessor Thermal Cooling Assembly: Dell Inspiron 4150
Assembly
NOTICE:
When replacing the microprocessor, to ensure proper thermal
operation, always install a new thermal cooling assembly that is compatible with
the new microprocessor.
1. Place the right side of the microprocessor thermal cooling assembly under the
palm rest, and lower the assembly onto the system board.
2. Tighten the four captive screws, labeled "1" through "4," in consecutive order.
Back to Contents Page
file:///F|/Service%20Manuals/Dell/Inspiron/4150/thermal.htm (3 of 3) [2/28/2004 7:29:46 AM]