2 port ieee-1394 firewire cardbus adapter with digital video editing kit infosafe 2.5” usb 2.0 on-the-go drive enclosure 7 port usb 2.0 hub cable zen 6.6 ft (2m) hdmi digital audio/video cable 2 port starview usb kvm switch kit with cables (2 pages)
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
Table of Contents Introduction ...................1 Features ................................ 1 Package Contents ............................. 1 System Requirements ..........................1 Installation ....................2 Technical Support ..................6 Warranty Information ................6 Instruction Manual...
Additional cables required (not included): Each controlled computer will require a USB Type A to Type B cable (1) and VGA switchbox cable (1) or StarTech.com 2-in-1 USB VM cable (1), optional 3.5 mm phono male-to-male sound cable for speakers and microphone (2).
Installation This section details how to connect your computers to the KVM switch. For best results, ensure that all the computers to be controlled are located as close as possible to the KVM switch and console peripherals (monitor, keyboard, mouse). This will reduce the length of cabling required and reduces the chance of interference.
Page 6
9. Using a USB Type A to Type B cable, connect the “A” (flat) end to an available USB port on the computer. Connect the opposite end to the “B” (D-shaped) USB connector on the KVM switch that corresponds to the computer number you wish to use for that system (directly under the monitor connection in step 2).
Page 7
Keyboard Hotkey Command Reference Chart Command Name Hotkey Sequence Description Switches access to the computer connected to the corresponding port number on the KVM. Select active computer [ScrLk]+[ScrLk]+[x] ([x]= a number on the keyboard) Switches which corresponding port number has access to the devices connected to the KVM’s Select USB hub control [ScrLk]+[ScrLk]+[Fx]...
Page 8
Binding/Unbinding control: By default the switch will automatically switch USB hub and audio control to the KVM port you select to control (bound). If you choose to “unbind” control, you can assign control of the audio and/or USB hub to a port other than the active computer using the commands above.
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 10
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the SV231USBA and is the answer not in the manual?
Questions and answers