Servicing Of Double-Insulated Products - Invacare HomeFill II Operator's Manual

SECTION 1—IMPORTANT SAFETY INSTRUCTIONS
If any leakage of the oxygen cylinder is detected DO NOT
attempt to use the cylinder. Turn the flow selector knob on the
regulator to Off. If leakage persists, place the cylinder
outdoors and notify your Home Health Care Provider or
Service Representative of this condition.
The HomeFill II is equipped with a high pressure relief valve
to ensure the user's safety. When activated, this safety feature
will make an extremely loud noise. If this noise occurs, turn
the unit Off and contact your Home Health Care Provider or
Service Representative.
Unplug unit from outlet when not in use and before cleaning.
This appliance is provided with double insulation. Use only
identical replacement parts. Refer to Servicing of
Double-Insulated Products on page 11.

Servicing of Double-Insulated Products

In a double-insulated product, two systems of insulation are
provided instead of grounding. No grounding means is
provided on a double-insulated product, nor is a means for
grounding to be added to the product. Servicing a
double-insulated product requires extreme care and
knowledge of the system, and is to be done only by qualified
service personnel. Replacement parts for a double-insulated
product MUST be identical to the parts they replace. A
double-insulated product is marked with the words
"DOUBLE INSULATION" or "DOUBLE INSULATED". The
symbol ( ) is also able to be marked on the product.
CAUTION
DO NOT unplug the power cord by pulling on the cord. To
unplug, grasp the plug not the cord, otherwise damage may
occur.
SAVE THESE INSTRUCTIONS
HomeFill II Compressor 11 Part No 1100873
™