SECTION 7—MAINTENANCE
SECTION 7—MAINTENANCE
Cleaning the Compressor Filter
WARNING
Push the power switch to the Off (O) position and unplug
the compressor before cleaning.
DO NOT operate the compressor without the filter
installed.
CAUTION
DO NOT unplug by pulling on cord. To unplug, grasp the
plug not the cord, otherwise damage may occur.
NOTE: For this procedure, refer to FIGURE 7.1.
NOTE: All compressors have one filter on the back of the cabinet.
NOTE: Perform this procedure at least once a week.
1. Unplug the compressor. Grasp the plug not the cord.
2. Remove the filter.
3. Clean the filter with a vacuum cleaner or wash in warm
soapy water and rinse thoroughly.
4. Dry the filter thoroughly before reinstallation.
Filter
FIGURE 7.1 Cleaning the Compressor Filter
HomeFill
II Compressor
37
Part No 1100873
™