Arp, Ttm Target Data - Furuno 1823C-BB Operator's Manual

2.26.7

ARP, TTM target data

You can show motion trends (range, bearing, course, speed, CPA and TCPA) for
ARP or TTM targets. Note that TARGET ID NUMBER, in the ARP SETUP menu,
must be turned on to display this data.
1. Place the cursor on the target whose data you want to see.
2. If not already displayed, press the [HIDE/SHOW] key to show the radar soft
keys.
3. Press the D:TARGET and D:TARGET INFO soft keys. The data of the
selected target appears at the bottom left-hand corner of the display. (If an
EBL/VRM data box is displayed the ARP (TTM) data box will be under it.)
4. Press the E:RETURN soft key to finish.
5. To erase ARP/TTM target data, select the corresponding target with the
cursor, then press the [CLEAR] key.
3nm
12/
LP
H-UP
Cursor
ARP
01
Target
No.01 VECTOR TRUE 15min
CSE 359.9˚T SPD 12.5kt
CPA 2.21nm TCPA 12:35
CPA and TCPA
Course and Speed
Target No., Vector Reference (True), Vector Time
ARP target data
offered by Busse-Yachtshop.de
2. RADAR OPERATION
°T
319. 9
TARGET
A TRAIL
TLL
B
OUTPUT
C ACQ
TARGET
D
INFO
E RETURN
359.9 ˚R
+
11.70
nm
2-41