Hot - Furuno 1823C-BB Operator's Manual

5.6 Hot Page Setup
Six user-arrangeable hot pages are provided for quick selection of desired
display. If the default hot pages are not to your liking you may change them as
shown below.
1. Press the [MENU] key followed by pressing the E:SYSTEM
CONFIGURATION, C:SYSTEM SETUP, C:HOT PAGE & NAV DISP SETUP
and A:HOT PAGE SETUP soft keys in that order.
2. Use the trackball to select the hot page number to set, then press the A:EDIT
soft key. The "SELECT SCREEN TYPE" window appears.
3. Use the trackball to select screen type desired among FULL SCREEN, SPLIT
X 2 and SPLIT X 3 and push the [ENTER] knob.
For the full-screen display, rotate the [ENTER] knob to select screen desired,
then press the [ENTER] knob. If you selected a split screen, for example,
SPLIT X 3, the display now looks as in the figure below.
Hot page setup menu, SPLIT X 3 screen, main screen selection
HOT P HO T PAGE 1 GE 1
HOT P HO T PAGE 2 GE 2
SELECT SCREEN TYPE
HO HOT P T PAGE 3 GE 3 3
HOT P HO T PAGE 4 GE 4 4
HO HOT P T PAGE 5 GE 5 5
HO HOT P T PAGE 6 GE 6
Hot page setup menu
HOT PAGE 1
RADAR PLOTTER
SOUNDER
NAV DATA OVERLAY
offered by Busse-Yachtshop.de
5. CUSTOMIZING YOUR UNIT
FULL SCREEN
SPLIT x 2
SPLIT x 3
Red cursor shows
current screen selection
HOTPAGE
SETUP
C ENTER
E CANCEL
5-19