Connecting Routes - Furuno 1823C-BB Operator's Manual

3. PLOTTER OPERATION
3.9.2

Connecting routes

Two routes which you have created can be connected as follows to form a new
route.
1. Press the [MENU] key to open the menu.
2. Press the C:WAYPOINTS/ROUTES soft key.
3. Press the B:ROUTES soft key.
4. Press the B:NEW ROUTE soft key.
5. If desired enter route name and comment.
6. Press the D:CONECT soft key.
7. Use the trackball and the alphanumeric keys to enter the route name for the
first route, beneath FIRST in the connect route window.
8. Press the A:F
route, forward or reverse.
9. Enter the route name of the second route as you did for the first route.
10. Press the D:SAVE soft key.
11. Press the [MENU] key to close the menu.
Note: The maximum number of waypoints in a route is 35. If this number is
exceeded an error message appears. In this case, delete waypoints in one
or both routes so the total number of waypoints does not exceed 35.
3-40
ROUTE NAME
0 0 1
COMMENT
CONNECT ROUTE
FIRST
SECOND
_ _ _ _ _ _ _ _ _ _ _ _
FORWARD FORWARD
Connect route window
R soft key to select direction to follow the waypoints of the
<− −>
offered by Busse-Yachtshop.de
NEW
ROUTE
A F < -- > R
D SAVE
E CANCEL