Error Messages (Temporary Errors: Check Led Blinking - Fujitsu fi-4860C Installation Manual

■ Error messages (Temporary errors
Check LED blinks when the following errors occur except the <Hopper empty> and <Mis-pick>
errors.
<Hopper empty>
HINT
(at Double feed)
HINT
<Paper Jam>
HINT
The following messages are displayed if no documents are loaded on the
hopper during the scan operation. Please load documents on the hopper.
The scanning will be continued, when you load documents on the hopper for
re-scanning.
To clear this message, press the
P a
The check LED does not blink when the Hopper empty errors.
D
o u b
P a
"xxxx" shows the value of the Batch counter.
The following message is displayed if a document is jammed in the ADF.
Refer to the "Operator guide" included in "User manual CD-ROM" for remov-
ing the jammed documents.
P
One of "1" - "8" is displayed instead of "x", depending on the paper jam
status.
: Check LED blinking
button.
p e r E m p
l e F e e d
p e r E m p
a p e r J a
)
x x x x x
t y
x x x x x
t y
m x
AP-5