Button Function - Fujitsu fi-4860C Installation Manual

■ Function of Buttons
Button Function
Name
Turns on/off when the main line switch is set to " | ".
1
Starts scanning in test mode.
Send to/Start
Clears the error if this button is pushed while the Check lamp is on or is blink-
Stop
ing.
Used for setup, or test mode.
Enter
Used for setup, or test mode.
Exit
Returns LCD display to "Ready" status.
Used for setup, or test mode.
Previous
Displays the previous menu item when this button is pushed.
Used for setup, or test mode.
Displays the next menu item when this button is pushed.
Next
Used for setup, or test mode.
Changes the setting of the selected item.
Used for setup, or test mode.
Changes the setting of the selected item.
1-7
1.3 Operator Panel