Fujitsu fi-4860C Installation Manual page 44

7. Select a language used for installation on [Choose Setup Language]
window and click [OK].
8. Install the application following the instructions in the window.
9. When the [InstallShield Wiizard Complete] window appears, click [Finish].
10. Your computer is restarted and the scanner wil be detected. Do not
remove the Setup CD-ROM from the CD drive until your PC will be
completely restarted.
ATTENTION
Now the installation of the scanner driver is completed.
ATTENTION
2-22
2.3 Installing the Scanner Driver and Application
Depending on the OS, the following operations may be necessary.
For Windows 98:
When a request for inserting the CD-ROM of Winows 98 appears, insert it
into the CD drive and click the [OK] button.
For Windows 2000:
When [Digital Signature not Found] appears, click [Yes].
For Windows XP:
1. When [Found New Hardware Wizard] appears, confirm that the Setup
CD-ROM is set in the CD drive, then click the [Next] button.
2. When any alarm is displayed on [Hardware Installation] window, click
the [Continue Anyway] button.
3. Click the [Finish] button.
For confirming if the installation was successful, perform a scanning oper-
ation by using an application that complies with the TWAIN standard such
as ScandAll 21.