Fujitsu fi-4860C Installation Manual page 26

No. Name
1 Operator panel
2 Power button
3 Hopper
4 Side guides
5 Hopper extension
6
ADF (Automatic docu-
ment feeder)
7 Pick roller unit
8 Guide plate
9 Pad Assy
10 Upper transport unit
11
Lever
12
Stacker
13 Stopper
14 Stacker extension
15 Main line switch
16 Power inlet
17 Interface connector
18 Third party slot (TPS)
19
Imprinter covers
1-4
1.2 Names and Functions of Parts
Used for operating the scanner.
Used to power the scanner on/off.
Document input tray.
Used for adjusting the document width.
Used for long documents.
Feeds documents automatically.
Picks top page from document stack.
The pad assy is mounted on.
Separates top page from document stack.
Opens for easy access.
Used to open the Upper transport unit.
Document exit tray.
Used to stop documents as they exit into the stacker.
Used to support long documents.
Controls supply of line power to the scanner.
For the power cable connection.
For Ultra Wide SCSI connection.
For installing an option board
Opens to access print cartridge for replacement.
Function