Fujitsu MHU2100AT Product Manual page 5

This manual describes MHU2100AT model of the MHU Series, 2.5-inch hard
disk drives. These drives have a built-in controller that is compatible with the
ATA interface.
This manual describes the specifications and functions of the drives and explains
in detail how to incorporate the drives into user systems. This manual assumes
that the reader has a basic knowledge of hard disk drives and their
implementations in computer systems.
This manual consists of seven chapters and sections explaining the special
terminology and abbreviations used in this manual:
Overview of Manual
CHAPTER 1
This chapter gives an overview of the disk drive and describes their features.
CHAPTER 2
This chapter describes the internal configurations of the disk drive and the
configuration of the systems in which they operate.
CHAPTER 3
This chapter describes the external dimensions, installation conditions, and switch
settings of the disk drive.
CHAPTER 4
This chapter describes the operation theory of the disk drive.
CHAPTER 5
This chapter describes the interface specifications of the disk drive.
CHAPTER 6
This chapter describes the operations of the disk drive.
Glossary
The glossary describes the technical terms that need to be understood to read this
manual.
Acronyms and Abbreviations
This section gives the meanings of the definitions used in this manual.
C141-E202-01EN
Preface
Device Overview
Device Configuration
Installation Conditions
Theory of Device Operation
Interface
Operations
i