Fujitsu MHU2100AT Product Manual page 161

*17 WORD 87
Bits 15:
Bits 14:
Bits 13-2: Reserved
Bit 1-0:
*18 WORD 88
Bit 15-8:
Bit 7-0:
*19 WORD 89
MHU2100AT = X'32': 100 minutes
*20 WORD 93
Bits 15:
Bit 14:
Bit 13:
Bits 12-8: In the case of Device 1 (slave drive), a valid value is set.
C141-E202-01EN
= '0'
= '1'
Same definition as WORD 84.
Currently used Ultra DMA transfer mode
Bit 13: '1' = Mode 5 is selected.
Bit 12: '1' = Mode 4 is selected.
Bit 11: '1' = Mode 3 is selected.
Bit 10: '1' = Mode 2 is selected.
Bit 9: '1' = Mode 1 is selected.
Bit 8: '1' = Mode 0 is selected.
Supportable Ultra DMA transfer mode
Bit 5: '1' = Supports the Mode 5
Bit 4: '1' = Supports the Mode 4
Bit 3: '1' = Supports the Mode 3
Bit 2: '1' = Supports the Mode 2
Bit 1: '1' = Supports the Mode 1
Bit 0: '1' = Supports the Mode 0
= 0
= '1'
'1' = CBLID- is a higher level than VIH (80-conductor cable).
'0' = CBLID- is a lower level than VIL (40-conductor cable).
Bit 12: Reserved
Bit 11: '1' = Device asserts PDIAG-.
5.3 Host Commands
5-85