Replacing The Presser Foot; Presser Foot Precautions - Brother 885-V95 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Replacing the Presser Foot

This section describes how to replace the presser foot.

Presser foot precautions

Be sure to observe the following precautions concerning the presser foot.
CAUTION
● Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the needle to bend or break.
● Only use presser feet designed specifically for this sewing machine. Use of any other presser
foot may result in injuries or damage to the machine.

Replacing the presser foot

Replace the presser foot as described below.
Memo
For details on attaching the embroidery foot
"Q", refer to "Attaching the Embroidery Foot"
(page 138).
Zigzag foot "J" is already installed when the
sewing machine is purchased.
a a Press
twice to raise the needle.
a Needle position button
b Turn off the sewing machine.
(Needle position button) once or
a
CAUTION
Before replacing the presser foot, be sure
to turn off the sewing machine.
Otherwise, injuries may occur if one of
the operation buttons is accidentally
pressed and the machine starts sewing.
c Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.
d Press the black button at the back of the
presser foot holder.
a
b
a Black button
b Presser foot holder
The presser foot holder releases the presser
foot.
Replacing the Presser Foot 43
a
1