Cutting The Thread - Brother 885-V95 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Sewing stitches
When
pressed with stitches other than 1 , 3
7 stitches, reinforcement stitches are used.
Reinforcement stitches are 3 to 5 stitches sewn on
top of each other in one place.
a Reverse stitching
b Reinforcement stitching
Memo
z The sewing machine can be set to
automatically sew reverse or reinforcement
stitches at the beginning and end of the
stitching. For details, refer to "Automatic
sewing reverse/reinforcement stitches" (page
64).
(Reverse/reinforcement stitch button) is
a b

Cutting the thread

and
When you have finished sewing, cut the thread.
■ Using the thread cutter button
a a When you wish to finish the stitching, press
(Thread cutter button) once.
a Thread cutter button
X
The threads are cut and the needle is raised.
z The thread cutter button cannot be used
when the presser foot lever is raised.
b b Raise the presser foot lever, then remove the
fabric.
a Presser foot lever
CAUTION
z
Do not press
after threads have already been cut,
otherwise the needle may break, the
threads may become tangled or damage
to the machine may occur.
z
Do not press
there is no fabric under the presser foot
or while the machine is sewing, otherwise
damage to the machine may occur.
Memo
z The machine can be set so that the thread
will be cut automatically when sewing is
finished. For details, refer to "Automatically
cutting the thread" (page 65).
a
Note
a
(Thread cutter button)
(Thread cutter button) if
2
Sewing 59