Brother 885-V95 Operation Manual page 189

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
j Slide the bobbin winder shaft to the left, and
then remove the bobbin from the shaft.
k
Hold the thread end with your left hand, and
wind off the thread clockwise near the bobbin
with your right hand as shown below.
l Wind the bobbin again.
Note
Make sure that the thread passes under the
pretension disk of the bobbin-winding
thread guide correctly (page 24).
Troubleshooting 187
5