Table of Contents
Advertisement
Custom
Adjust the screen scale and position manually with this
function.
Press the Point ►button at Custom and the Custom is
displayed on the screen, you can use the Point ▲▼ buttons
to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V . .................. When set to On, the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust Scale H, then the
screen scale is automatically modified
based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at yes.
When Custom is selected, the saved
scale is used.
Reset . ................ Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at yes.
For zooming in and out the images
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
D . zoom + appears. Press the SELECT button to expand the
image size. Use the Point
The Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
button on the remote control.
+
Digital zoom -
Select Digital zoom -. The On-Screen Menu disappears
and D . zoom – appears. Press the SELECT button to
compress image size.
The projected image can be also compressed by pressing
the D.ZOOM
button on the remote control.
-
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
buttons, SELECT and Point buttons.
+/-
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
30-31) again or adjust the screen size with the D.ZOOM
buttons.
buttons to pan the image.
▲▼◄►
Note:
• When no signal is detected, Normal is set
automatically and the Aspect dialog box
disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the input
signal.
Remote Control
Note:
• The panning function may not operate properly if
the stored Mode in the PC adjust Menu is used
(p.35).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when the
custom is selected for the screen size.
• True, Full and Digital zoom +/– cannot be
selected when 480i, 575i, 480p or 575p is
selected in the PC System Menu (p.32).
• Digital zoom +/- cannot be selected when Full
+/-
or True is selected.
• When Custom is selected, the Digital zoom -
function is disabled.
Computer Input
POINT buttons
SELECT button
D .ZOOM + button
D .ZOOM - button
39
Advertisement
Table of Contents
