Using The Boot Menu - 3Com 3C17500 Installation Manual

44 C 4: M
HAPTER AINTAINING

Using the BOOT Menu

S
OFTWARE
After you power on the Switch 8800, the BootROM program runs automatically.
The terminal displays the following information:
Starting...
*************************************************
*
*
*
*************************************************
Copyright(C) 2000-2004 by 3COM Corporation, Inc.
Creation date: Jul
CPU type
CPU L2 Cache
CPU Clock Speed : 400MHz
BUS Clock Speed : 100MHz
Memory Size
Flash file system init....done
Board self testing...........................
The board is steady
SlotNo of this board is 4
The MCX is existent
BootRom main system CRC check is OK
82559 register testing is OK
EPLD1 testing is OK
EPLD2 testing is OK
16c2552 register testing is OK
Please check LEDs......................LED testing finished
The switch's Mac address is 0040.9c30.b2d4
Press Ctrl+B to enter Boot Menu...
The contents displayed on the terminal can vary with different versions of Boot
ROM.
If you press Ctrl+B immediately, the system displays the Boot Menu. If you do not
press Ctrl+B, the system initiates the program decompression process. At this time
if you want to access the BOOT Menu, you must reboot the switch.
1 Press Ctrl+B. The system displays:
Initialize flash file system. Please wait!
Password :
Switch 8800 Bootrom, Version 113
5 2004, 10:43:58
: MPC755
: 1024KB
: 512MB
*
*
*