Related Manuals for Kramer TP-46N
Summary of Contents for Kramer TP-46N
-
Page 1: User Manual
K R A ME R E LE CT R O N IC S L TD . USER MANUAL MODEL: TP-46N Component/UXGA/Audio Receiver P/N: 2900-300027 Rev 3... -
Page 3: Table Of Contents
Connecting the System in Component Video Mode Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors Technical Specifications Figures Figure 1: TP-46N Component/UXGA/Audio Receiver Figure 2: Distribution System, UXGA Mode Figure 3: Distribution System, Component Video Mode Figure 4: CAT 5 PINOUT... -
Page 4: Introduction
Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront the video, audio, presentation, and broadcasting professional on a daily basis. In recent years, we have redesigned and upgraded... -
Page 5: Getting Started
Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer TP-46N away from moisture, excessive sunlight and dust This equipment is to be used only inside a building. It may only be connected to other equipment that is installed inside a building. -
Page 6: Recycling Kramer Products
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/. -
Page 7: Overview
Additional TP-46N units can be connected via the TP-46N LINE OUT CAT 5 connector, to extend the range of the output signals. You can connect up to three additional TP-46N units, adding a total cable length of up to 300 meters. The video quality may be reduced if further units are connected. -
Page 8: About The Power Connect Feature
The Power Connect feature where the TP-46N can power the TP-45 or TP-45RC over the same CAT 5 cable (see Section 3.1) EQ. and LEVEL controls A CAT 5 output for transmitting the signal to an additional receiver ... -
Page 9: Defining The Tp-46N
Defining the TP-46N Figure 1 defines the TP-46N Component/UXGA/Audio Receiver: Figure 1: TP-46N Component/UXGA/Audio Receiver Feature Function ANALOG AUDIO Connect to the stereo analog audio acceptor 3.5mm Mini Connector S/PDIF RCA Connector Connect to the digital audio acceptor Y RCA Connector... -
Page 10: Connecting A Component/Uxga/Audio Distribution System
There is no signal conversion; a component input cannot be sent to a computer graphics output, nor can a digital audio input be sent to an analog audio output. TP-46N - Connecting a Component/UXGA/Audio Distribution System... -
Page 11: Connecting The System In Uxga Mode
Kramer C-GMA/GMA cable (VGA 15-pin HD (M) with audio jack to VGA 15-pin HD (M) with audio jack) Cables are not supplied. The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com. 2. On the TP-45, use the SELECT buttons as follows: ... -
Page 12: Figure 2: Distribution System, Uxga Mode
The signal from the UXGA source is transmitted via CAT 5 cable, decoded and converted at the UXGA OUT 15-pin HD (F) connector to the UXGA acceptor. If you cannot connect the power to both the TP-45 and TP-46N, you can connect the power to the TP-46N alone (see Section 3.1). -
Page 13: Connecting The System In Component Video Mode
Alternatively, you can connect an analog audio acceptor, or you can connect both. 5. Connect the LINE OUTPUT RJ-45 connector on the TP-45/TP-45RC to the LINE IN RJ-45 connector on the TP-46N, via CAT 5 cabling, see Section 4.3. TP-46N - Connecting a Component/UXGA/Audio Distribution System... -
Page 14: Figure 3: Distribution System, Component Video Mode
Y, OUTPUTS RCA connectors to the component video acceptor. If you cannot connect the power to both the TP-45 and TP-46N, connect it to the TP-46N only. If more than one TP-46N is connected, connect the power to each TP-46N unit 7. -
Page 15: Wiring The Cat 5 Line In / Line Out Rj-45 Connectors
Orange Green / White Blue Blue / White Green Brown / White Brown Pair 1 4 and 5 Pair 2 1 and 2 Pair 3 3 and 6 Pair 4 7 and 8 TP-46N - Connecting a Component/UXGA/Audio Distribution System... -
Page 16: Technical Specifications
-40° to +70°C (-40° to 158°F) HUMIDITY: 10% to 90%, RHL non-condensing POWER CONSUMPTION: 12V DC; 140mA (TP-45/RC), 830mA (TP-46N) DIMENSIONS: 12 cm x 7.2 cm x 2.8 cm (4.7" x 2.8" x 1.1") W, D, H WEIGHT: 0.3kg (0.67lbs) approx... - Page 18 For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...