Advanced: Camera Settings (Ctd) - Swann M455CAM270513E Setup Manual

Accelerate the Video Stream: Applies additional streamlining to the way the video
signal is sent, increasing performance at the cost of stability. If the stream becomes
unstable, turn this option off.
Audio Input Gain: How much amplification is applied to the audio signal. A high
gain makes it possible to hear softer noises, but increasing the gain decreases the
audio fidelity, and may distort the sounds dramatically.
Audio Output Enable: Toggles the speaker socket on the side of the SwannEye HD
on and off. For the intercom function to work, the audio output needs to be on. The
speakers work best when placed some distance away from the inbuilt microphone
to prevent "feedback".
All Connections can Play Audio Ouput: This control is for the ADS-445 Pan & Tilt
model and is not used for this camera.
Audio Output Gain: How much amplification is applied to the outgoing audio
signal. Setting a high level of gain will make softer sounds louder, the higher the gain
the lower the audio fidelity will be. Extremely high gain levels will distort the audio
dramatically.
26

Advanced: Camera Settings (ctd)

Constant/Variable Stream Rate: Whether the data rate will
adapt to the amount of information in the video.
With Timestamp: When selected, the timestamp will be
broadcast over the camera's image.
Enable AU Header: Toggles the Access Unit Header on and
off. An AU header is an advanced networking option - if you
don't know what it means, we suggest leaving it set to OFF.
Audio
Audio Input Enable: Toggles the
microphone on and off. While off,
the camera won't transmit any
audio information.
Split Voice Stream: Alters the way
that audio information is streamed
with the video. If you're having
problems with audio streaming and
fidelity, this option might help.