Table of Contents
Advertisement
IR (Infrared) LEDs: The camera will use
these in low-light conditions to generate
a black and white image, even in total
darkness.
Light Sensor: Detects the amount of light
available and turns on the IR LEDs when
necessary
Microphone: Allows the camera to hear
nearby sounds, and stream them with the
video.
Network Activity LED: Flashes whenever
the camera is sending or receiving
information over a network. This indicator
makes no distinction between data sent
via the wired or wireless connection.
Audio Out: The audio out will output any
audio sent to the camera on powered
external speakers. With the app running
you can talk into your phone and your
voice can be heard on the speakers!
Micro SD Card Slot: Where you can insert
flash memory to augment the camera's
functions to allow it to record video clips
and snapshots locally when motion is
detected (see page 27 for setup details).
WPS/Reset Button: When pressed and
held for 3-5 seconds, allows for wirelessly
connecting to a WPS enabled router.
When pressed and held when the power is
disconnected and reconnected, it reverts
all settings to the factory defaults.
WiFi Antenna: The built in antenna that
connects to your WiFi if you want to use
the camera wirelessly.
RJ45 (Ethernet): For a wired connection,
connect this port to a spare port on your
router.
Power Socket: The power input. Never
connect anything other than the supplied
power adapter.
4
Layout of the Camera
IR LEDs
Light Sensor
Microphone
Network
Activity LED
WiFi Antenna
RJ45
Ethernet
Audio Out
Micro SD
Card Slot
WPS/Reset
Button
Power Socket
Advertisement
Table of Contents
