Table of Contents
Advertisement
•
Unplug the 5V DC In plug from the rear of the
•
Press and hold the WPS/Reset Button on the side of the camera.
•
Reconnect the 5V DC In plug.
•
Release the WPS/Reset Button.
Connecting to a Wireless Network without using WPS
The SwannEye HD doesn't need WPS to connect to a wireless network, but it does
make things much easier. If you're determined to connect wirelessly to a non-WPS
network, then:
Connect the SwannEye HD to the router via an ethernet cable, as shown in
•
"Connection Guide" on page 5. You can get rid of the cable later - but we
need to access the camera first.
Open the SwannEye HD software on a
•
computer connected to the same network.
From the Login screen, click on the
•
Settings button.
•
On the Local Management Overview
screen, click on the Search icon (
•
Your camera should appear on the list of devices. Click it once to select it, and
then choose the Device Properties icon (
username/password (defaults: admin/123456).
From the list on the left hand side of the menu, select Wi-Fi.
•
Click Search Wifi and then click Search. A list of the discovered WiFi networks will
•
be shown, select yours from the list and click Select. Enter your WiFi password in
the box next to Key. Leave the other settings as default unless you are sure you
know what goes there, the automatic options are usually the easiest and most
realiable to use. When you're done, choose Apply. You should then be able to
disconnect the ethernet cable, and the camera should automatically reconnect
via Wi-Fi, assuming you've entered your details correctly.
From Program Settings, choose Modify User Info. Then, enter your Old Password,
then your New Password and confirm it in the field below. Also enter your email
address - that way, if something goes wrong, we can get in contact with you and fix it.
Additional Operations
How to Reset the Camera to Factory Defaults
Changing Your Password
).
). You may be asked for the camera's
23
Advertisement
Table of Contents
