Connection Guide - Swann M455CAM270513E Setup Manual

For a wired connection:
1. Connect the RJ45 ethernet plug on the rear
of the SwannEye HD to a spare ethernet port
on your router using the included ethernet
cable (or a longer one if you require).
2. Connect the output from the supplied power adapter into the DC5V input.
3. Plug
the power adapter into a wall socket.
1. Connect the output from the supplied power adapter into the DC5V input.
2. Plug
the power adapter into a wall socket.
3. Pair
the camera to your network by using the WPS button on the camera and your
router (see "Connecting the SwannEye HD to a Wireless Network" on page 6).

Connection Guide

1
That's it! All other connections are optional.
1
For a wireless connection:
That's it! All other connections are optional.
2
2
3
3
5