Precor P80 Operating And Maintaining page 142

Precor p80 operating and maintaining
Hide thumbs Also See for P80:
Table of Contents

Advertisement

64
During normal operation, the status light is a steady blue. It
changes color and pattern if the treadmill's electronic drive
unit detects a mechanical or electrical problem.
Table 4. Active status light appearances and their meanings
Status light
appearance
Steady
(solid) blue
Pulsing blue The treadmill is due for
Steady
(solid)
yellow
Pulsing
yellow
Assembling and Maintaining TRM 800-Series Treadmills
Meaning
The treadmill is
operating normally and
does not currently
need maintenance.
scheduled
maintenance (P80
console only), or the
treadmill belt needs to
be replaced (except for
230 V models).
The treadmill has
detected and
recovered from an
error. It can still be
used, but some
functions may not be
available.
The treadmill has
detected an error, has
been unable to recover
from the error, and has
taken itself out of
service.
Action required
None.
Perform the needed
maintenance, then reset the
status light.
Refer to the console's event
log for more information.
Power-cycle the treadmill
(switch it off, wait 30
seconds, then switch it on
again). If the error occurs
again, check the console's
event log for more
information, then contact
Precor Customer Support.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents