Precor P80 Operating And Maintaining page 134

56
4. Repeat steps 2 and 3 to install the other access cover,
5. Insert the edge of the rear cover into the lower edge of the
Assembling and Maintaining TRM 800-Series Treadmills
then tighten all four screws securely using a ⁵ ₃₂-inch hex
wrench.
Figure 34: Access panel attachment
fairing. Lift the cover until it is possible to insert two
¹ ₄-inch × ³ ₄-inch self-tapping panhead screws into the
bottom two screw holes and partially tighten them.
Figure 35: Rear cover positioning