Tpm Fingerprint Utility Initialization; User Fingerprint Enrollment - Panasonic CF-C1 Series Reference Manual

Fingerprint Reader
Click [Next].
D
Installation starts. Follow the on-screen instructions.
When the "Protector Suite *.* has been successfully installed." message appears, click [Finish].
E
At the confirmation message, click [Yes].
The computer restarts.
Log on to Windows as an Administrator.
F
The "Fingerprint software Icon"
• If the icon does not appear, click
3

TPM Fingerprint Utility Initialization

Performed by the Computer Administrator.
The "Invalid TPM status" message is displayed by the "Fingerprint software Icon"
• If the icon does not appear, click
If the TPM is not being used, skip this step.
Click on the "Invalid TPM status" message and then click [Initialize].
A
Follow the on-screen instructions.
NOTE
If the "Invalid TPM status" message is not displayed
Click Windows 7 (Start) /
[Advanced Settings] - [Trusted Platform Module (TPM)] - [Initialize]. And then click
[Protector Suite] - [Control Center] - [Identity] - [Multifactor], and choose a method of authentication.
4

User Fingerprint Enrollment

Performed by each user.
Double-click the "Fingerprint software Icon"
A
If the License Agreement appears, carefully read it, and then click [Accept].
B
Select an enrollment mode, if so required, and click [Apply].
C
Enrollment mode
You can make the configuration for the enrollment only once during this initialization phase.
• Enrollment to the biometric device
All enrolled fingerprints are stored directly in the fingerprint sensor. The user data will be secured by the
hardware protection keys obtained by the fingerprint sensor. There is a limit to the number of fingerprints
that can be enrolled.
appears in the notification area.
.
.
[start] - [All Programs] - [Protector Suite] - [Control Center] - [Settings] -
Windows XP
.
108
in the notification area.
(Start) - [All Programs] -