Release Amt Configuration - Panasonic CF-C1 Series Reference Manual

®
Intel Active Management Technology

Release AMT configuration

1 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
2 If the Supervisor Password is not set, select the [Security] menu, then set Supervisor
Password.
3 Select the [Security] menu, and select [AMT Configuration], and press
4 Select [Intel(R) AMT] and press
5 Select [Disabled] and press
6 Press .
Esc
7 Select the [Exit] menu, and select [Save Current Values], and press
At the confirmation message, select [Yes] and press Enter.
8 Select the [Security] menu, and select [AMT Configuration], and press
9 Select [Reset AMT Configuration] and press
At the confirmation message, select [Yes] and press Enter.
10 Select [Yes] at the [Setup Confirmation] screen, and press
The computer will restart.
If the password is requested, enter the Supervisor Password.
11 Press when the "Intel(R) ME unconfiguration in progress" message will appear.
Y
The computer will restart.
12 Turn off the computer.
or while [Panasonic] boot screen is displayed.
F2 Del
.
Enter
.
Enter
Enter
Enter
.
.
Enter
185
.
Enter
.
.
Enter