Panasonic CF-C1 Series Reference Manual page 180

Hard Disk Data Erase Utility
6
Press .
F10
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
7
Press or
F2 Del
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
8
Set the Product Recovery DVD-ROM Windows 7 into the CD/DVD drive.
9
<CF-C1 Series>
Select the [Exit] menu, then select your CD/DVD drive in [Boot Override].
<CF-F9 Series>
Select the [Exit] menu, then select [MATSHITAXXXX] in [Boot Override].
10
Press .
Enter
The computer restarts.
11
Click [Erase the whole data on the Hard Disk for security] and click [Next].
12
At the confirmation message, click [YES].
13
Click [Continue].
14
Click [Continue] again.
15
Click [YES].
Erasing the hard disk data starts.
16
After erasing is completed, remove the Product Recovery DVD-ROM and click [OK].
while [Panasonic] boot screen is displayed.
180