Mode Selector - Blaupunkt SAN JOSE MP41 Owner's Manual

Switching the Source (Selecting auxiliary
input)
You can connect the auxiliary equipment (Portable cassette
player, etc) to this radio via optional AUX-IN cable. (See page
20) Each time the CD is pressed, the operation source will
change over as shown below;
RADIO CD CD changer or AUX
Press the to return to radio mode.
BND / TS
Note
If the button is pressed when no CD has been loaded
CD
into the unit, The CD mode will skip to the CD changer mode
or AUX mode.
Also, if the CD changer is not connected, the system will move
across to the AUX mode regardless of whether auxiliary equip-
ment is connected or not ("AUX" will be displayed.)
It is not possible to switch to the AUX mode when the CD
changer is connected.

Mode Selector

Each time the is pressed, the display window will change
DISP
over as shown below;
Priority indication
STATION(DISC) CALL * : Refer to " Display priority setting "
DSP PRIORITY : Refer to " Display priority setting "
DISP. SPEED : SLOW / FAST
SCROLL TYPE : ROLLING / WITH PAUSES
METER 1 : METER 0 / METER 1 / METER 2 / METER 3 / METER 4
LEVEL 1 : LEVEL 1 / LEVEL 2
CONTRAST : –10 ~ 0 ~ +10
MESSAGE ON : MESSAGE ON / MESSAGE OFF
CLOCK ADJUST : Refer to " Setting the Clock "
CLOCK 12 : Refer to " Setting the Clock "
DEMO ON : Refer to " How to defeat Demo Mode "
Notes
• "STATION CALL" and "DSP priority" are not displayed in
AUX mode.
• If you make no button input or dial operation in few sec-
onds, the display returns priority indication.
Display priority setting
Example
To set Station Name to the Display Priority.
1.
Repeatedly press the
appears in the display window.
2.
Rotate the dial to select "STATION NAME" or "FRE-
QUENCY".
3.
Hold the pressed for more than 2 seconds to con-
DISP
firm/enter your selection.
"NO NAME" or a previously assigned station name (See
page 10) flashs once to indicate that Station Name is
selected for the Display Priority.
After 5 seconds, the display mode will automatically re-
turn to the Display Priority showing either "NO NAME" or
the station name.
Tip
Frequency Display is initially set to the Display Priority,
and Station Name ("NO NAME") is set to the "Tempo-
* : Radio mode only
rary" indicator.
Display Priority can be set for the following items;
• Radio mode
Station name
Frequency
• CDC (CD changer) mode
Disc name Disc No/Track No/Elapsed track time
• CD or other media
SCROLL
FOLDER NAME
FILE NAME
TRACK/TIME
SONG NAME
ALBUM TITLE
ARTIST NAME
DISP to display "DSP PRIORITY"
: ID-3Tag (Song/Album/Artist) scrolls.
: Folder name scrolls.
: File name scrolls.
: Track No, and elapsed time scrolls.
: Song name scrolls.
: Album title scrolls.
: Artist name scrolls.
E-5