Table of Contents
Advertisement
Radio Reception
Seek Tuning
1.
Press the
to select the desired AM or FM band.
BND / TS
FM1 ➜ FM2 ➜ FMT ➜ AM ➜ AMT
(FMT & AMT are Travel Store bands.)
2.
Press the
to tune in stations. Tuning automati-
TUN/ TRK
cally stops at a broadcasting frequency.
When tuned in to FM stereo broadcasting stations, the
"
" stereo signal indicator will appear on the display
window.
Manual Tuning
1.
Press the
to select the desired AM or FM band.
BND / TS
2.
Press the
or
for more than 0.5 second
TUN/ TRK
TUN/ TRK
to activate the manual tuning mode. Press again to tune in
to stations.
"MAN" will appear on the display window.
After 4 seconds of completing Manual Tuning, the tuning
control will revert to the Seek Tuning mode.
Scan Tuning
1.
Press the
to select the desired AM or FM band.
BND / TS
2.
Hold the
pressed for less than 2 seconds.
SC/PS
The unit will scan the selected band for stations.
"SCAN" indicator will appear on the display window. The
unit will stop at each station for 8 seconds, before con-
tinuing to the next station.
Press the
again to stop Scan Tuning and remain
SC/PS
this on the selected frequency.
Tip
While tuning, the pie-shaped signal-strength meter
on the display is lit differently depending on the strength
of the signal. While scanning bands, the pie-shaped sig-
nal-strength meter spins. While playing CD's, this display
also spins.
Preset Scan Tuning
1.
Press the
to select the desired AM or FM band.
BND / TS
2.
Hold the
pressed for more than 2 seconds.
SC/PS
"SCAN" indicator will appear on the display window.
The unit will scan preset memory for the 12 stations from
the AM/AMT band or the 18 stations from the FM1/FM2/
FMT bands. The unit will stop at each preset station for 8
seconds, before continuing to the next preset station.
Press the
again to stop Preset Scan Tuning and
SC/PS
remain this on the selected frequency.
Memorizing Stations Automatically (Travel Store)
1.
Press the
to select the desired AM or FM band.
BND / TS
2.
Hold the
pressed for longer than 2 seconds.
BND / TS
Up to 6 stations with strong signals will be automatically
stored in preset memory for the selected band.
If the radio is in FM1 or FM2, it switches to FMT. If the
radio is in AM, it switches to AMT.
Note
This function is available for FMT and AMT.
Memorizing Only the Desired Stations
You can store up to 6 stations on each band (18 for FM1, FM2
and FMT, 12 for AM and AMT) in the order of your choice.
1.
Press the
to select the desired band.
BND / TS
2.
Press the
to tune in stations.
TUN/TRK
3.
Press and hold the desired preset memory button
for about 2 seconds until the frequency indicator
6
flashes twice.
The number of the pressed preset memory button ap-
pears on the display window.
Note
If when you store another station on the same preset number
button, the previously stored station is replaced with new one.
Receiving the Memorized Stations
1.
Press the
to select the desired AM or FM band.
BND / TS
2.
Press the
-
momentarily.
1
6
Local/Distant (LO/DX) Selection
This feature is used to select the signal strength at which the
radio will stop during Seek Tuning.
Press the
for more than 2 seconds to select the
MUTE / SENS
Local setting and only strong (local) stations will be received.
The "lo" indicator appears on the display window.
Pressing for more than 2 seconds again will select the Dis-
tant setting and the radio will stop at a wider range of signals,
including weaker more distant stations. The "lo" indicator will
go out on the display window. DX is the suggested default
setting.
1
-
E-9
Hide quick links:
Advertisement
Table of Contents
