HP Z Workstation series User Manual page 59

Hide thumbs Also See for Z Workstation series:

Table of Contents

Route the CPU power cable (P3) through the opening next to the power supply as shown in the

following figure.

Figure 7-5

Secure the airflow guide in the chassis.

Insert the tab on the airflow guide into the slot next to the yellow ODD release lever (1), and

then press down as shown in the following figure.

Figure 7-6

Ensure that the airflow guide secures even with the end of the FDD bay, and that the latch

(2) engages with the slot in the internal bay cover.

ENWW

Routing the CPU power cable

Securing the airflow guide

Installing the airflow guide (Z400 only)

Table of Contents